rincian perusahaan
Yangzhong Haiteng Fluorine Plastic Product Factory
Harga satuan: | USD 3 - 3.5 / Piece/Pieces |
---|---|
Jenis pembayaran: | L/C,T/T,D/P |
Inkoterm: | FOB,CFR,CIF |
Min. Memesan: | 100 Piece/Pieces |
Model No: UHMWPE Part
Merek: HAITENG
Kemasan: Kotak kertas
Produktivitas: 300000Pcs/Month
Transportasi: Lautan,Tanah,Udara
Tempat asal: Yangzhong Cina
Dukungan tentang: 300000Pcs/Month
Sertifikat: ISO
Kode HS: 39209910
Pelabuhan: Pelabuhan Shanghai
Jenis pembayaran: L/C,T/T,D/P
Inkoterm: FOB,CFR,CIF
Bagian UHMWPE Plastik CNC yang Disesuaikan
Karakteristik
1. Resistansi aus sangat tinggi, tujuh kali tahan aus dibanding baja, empat kali lipat dari PTFE
2. Resistansi anti benturan sangat tinggi, dua kali impact resistance dibanding PC, lima kali lipat dari ABS.
3. Pelumas self-lubrication yang baik, sama seperti PTFE, lebih baik dari baja dan kuningan yang dilumasi minyak pelumas.
4. Resistensi anti korosi yang baik, memiliki sifat kimiawi yang sangat stabil dan dapat menahan korosi dari semua jenis pelarut media dan korosif dalam suhu dan kelembaban tertentu.
5. Resistensi inadhesion yang sangat tinggi, permukaan produk hampir tidak membubuhkan bahan lainnya.
6. Resistansi sangat tinggi dampaknya, sepuluh kali impact resistance dibanding PA66, delapan kali lipat dari PTFE.
7. Resistansi suhu rendah yang baik, pada nitrogen cair (- 196ºC), masih memiliki perpanjangan.
Beberapa bahan lainnya bisa mencapai performa ini.
8. Properti tidak beracun dan bersih, bahan UHMW-PE yang dibuat oleh Guangzhou Engineering Plastics Industries (Group) Company.
Gambar
PROPERTIES | Unit | Value |
I.Physical Properties | ||
Density | g/cm3 | 0.96 |
Water absorption 24hrs | % | 0.01 |
II.Thermal Properties | ||
Heat deflection temperature - HDT/A | ºC | 42 |
Min. service temperature | ºC | -269 |
Max. service temperature-Long Term | ºC | 90 |
Thermal conductivity at 23 ºC | W/(K*m) | 0.42 |
Coefficient of linear thermal expansion | 10-4*K-1 | 2 |
Flammability Rating(6mm thickness) | - | HB |
III.Mechanical Properties at 23ºC | ||
Tensile strength at yield | MPa | 17 |
Tensile strength at break | Mpa | 40 |
Elongation at break | % | >50 |
Modulus of elasticity after tensile test | MPa | 650 |
Modulus of elasticity after flexural test | MPa | 800 |
Hardness - Shore D |
|
61 |
Charpy impact strength | kJ/m2 | N. B. |
Friction coefficient |
|
0.25 |
IV.Electrical Properties at 23ºC | ||
Dielectric constant at 1 MHz | 106Hz | 3.1 |
Dielectric loss factor at 1 MHz | 106Hz | 0.0001 |
Volume resistively | Ohm (Ω) * cm | >1014 |
Surface resisively | Ohm (Ω) | >1011 |
Dielectric strength | kV/mm | 45 |
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m | ||
|
|
|
Kategori Produk : Produk UHMWPE > Produk UHMWPE lainnya
Hak cipta © 2024 Yangzhong Haiteng Fluorine Plastic Product Factory semua hak dilindungi.